Stainless Steel Woven Wire Mesh from Maidong
Stainless steel woven wire mesh uses interlaced wires to form a screening or filtration medium. For a useful quotation, specify the alloy, weave, opening or rating basis and required supply form—not only a mesh count.
This product update connects Maidong’s woven mesh announcement with the practical information industrial buyers need before sending an RFQ.
Product Announcement: The Original Context
Maidong’s company-issued announcement on PRLog, dated November 12, 2025, introduced a stainless steel woven mesh family for industrial filtration and screening. It described 304, 316 and 316L material options, plain, twill and Dutch weave structures, and drawing-based fabrication enquiries.
Read the original Maidong announcement on PRLog. This is a company press release, not an independent product test or certification. The buyer notes below do not establish stock, delivery time or guaranteed performance.
Choose the Product Form Before Requesting a Quote
Rolls and cut sheets
Specify width, length or cut dimensions, edge condition and quantity. Review woven mesh rolls.
Filter discs
Specify diameter or profile, layers, edge finish and the surrounding seal or support. Explore filter disc forms.
Cylinders and formed parts
Provide the finished drawing, seam, support and end interfaces. View wire mesh filter cylinders.
Woven Mesh Buyer Specification Checklist
| Field | Buyer input | Selection note |
|---|---|---|
| Material | 304, 316, 316L or the specified alloy/standard; required material records | Appearance alone does not verify the alloy. |
| Weave and opening | Plain/twill square mesh: mesh count plus wire diameter or aperture; Dutch weave: full construction and rating basis | A single mesh or micron number can be ambiguous. |
| Supply dimensions | Roll width/length, cut-sheet size, or finished-part drawing and tolerances | Clarify which dimensions control equipment fit. |
| Service conditions | Medium, temperature, flow direction, differential pressure and cleaning where relevant | These affect compatibility and support needs. |
| Order acceptance | Quantity, inspection method, tolerance agreement and requested documentation | Do not infer inspection certificates or stock from the announcement. |
This is a purchasing checklist, not a stock specification table. For geometry references use the mesh size chart; for dense weaves use the Dutch weave specification guide.
Real Woven Mesh Examples
These Maidong library images illustrate roll form, visible wire intersections and dense woven cloth. A photograph does not certify a grade, opening size or filtration rating.
Woven roll
Weave detail
Dense filter cloth
Match Material and Weave to the Duty
Material review
Specify the liquid or gas, temperature and cleaning exposure before confirming the alloy. Compare 304 and 316 selection factors.
Weave review
Square openings and dense Dutch weave have different geometries. Do not apply a square-mesh conversion to Dutch cloth.
Equipment review
Fine media may require support, protected edges and specified joining details. Define the finished assembly, not just the raw mesh.
For a deeper engineering checklist, continue to precision woven mesh filtration selection. For the commercial family overview, see stainless steel wire mesh products.
From Product Enquiry to a Reviewable RFQ
1 · Define the duty
Explain what is being screened or filtered, the target particles and service conditions.
2 · Attach the specification
Add the material, mesh construction, dimensions, drawings and quantity; mark unknown values for review.
3 · Agree the scope
Confirm the proposed media, fabrication details, acceptance requirements and quotation terms before ordering.
Woven Mesh Purchasing FAQ
State the material grade, weave, mesh count and wire diameter or aperture, supply form, dimensions, quantity and acceptance requirements. Precision should refer to measurable agreed requirements, not the word alone.
No. The grade specifies the alloy. Opening geometry, weave construction and the stated retention or test basis determine what the mesh is intended to separate.
Yes. Changing the wire diameter changes the clear opening. Quote the mesh count together with wire diameter or aperture, rather than using mesh count alone.
Send a drawing for the required disc, cylinder or other formed component. Include dimensions, tolerances, seam or edge details, support and equipment interfaces so the fabrication scope can be reviewed.
No. The announcement introduces the product family. Availability, the exact specification, quantity, documentation and delivery requirements must be reviewed for each quotation.
Send Your Woven Mesh Requirements
Maidong Metal Wire Mesh Products Co., Ltd. works with stainless steel wire mesh and fabricated filter components. Send your specification or drawing so the material, mesh and fabrication requirements can be reviewed together.
