Custom Wire Mesh Fabrication Supplier for Drawing-Based Parts
Maidong reviews custom wire mesh parts against a controlled drawing and service specification. Define the filtration media, finished geometry, support, edge, seam or joint, interface dimensions, tolerances, flow direction and inspection requirements before comparing quotations.
Custom Wire Mesh Fabrication: From Media to Finished Part
Select the media
Specify alloy, weave, wire geometry, aperture or rating basis.
Define the shape
Control the disc, cylinder, cap, cone or basket geometry.
Design support and edges
Add perforated support, coarse mesh, frames, rims or flanges where required.
Control fit and inspection
Mark interfaces, critical tolerances, joints and acceptance requirements.
Drawing Fields by Fabricated Component
A product name does not define the finished part. Put the functional dimensions, media construction and joining scope on the same drawing revision.
Mobile: swipe sideways to view every column.
| Component | Key drawing fields | Typical fabrication risk |
|---|---|---|
| Cut or framed disc | Diameter/outline, layers, edge, thickness and seating face | Frayed edge, wrong fit or bypass around the perimeter |
| Cylinder or tube | ID/OD, length, seam, support, ends and flow direction | Distortion, incorrect seam or unsupported fine media |
| Formed cap or cup | Diameter, depth, flange, radii, profile and open interface | Media damage or infeasible forming geometry |
| Conical screen | Large/small diameter, axial length or angle, seam and rim | Wrong installation envelope or uncontrolled cone geometry |
| Basket | Body, flange/rim, handle, bottom, seam and housing clearance | Poor seating, removal interference or lost captured solids |
Formed Mesh Caps, Cups and Profiled Screens
Forming feasibility depends on alloy, wire diameter, weave, aperture, depth-to-diameter relationship and corner radius. Define the finished profile, flange or rim, interface and any support layer. Reference images are useful, but controlled dimensions determine the quotation.
For the broader navigation family, review fabricated mesh products.
Filter Discs and Cylindrical Screen Components
Cut and framed filter discs
Specify diameter, media layers, edge construction, thickness and seating interface. See stainless steel filter discs.
Cylinders and screen bodies
Specify ID/OD, length, seam, support, ends and flow direction. See wire mesh filter cylinders.
Media, Support and Joining Decisions
Fine retention layer
Identify the weave, aperture or complete rating basis separately.
Structural support
Define perforated, expanded or coarse-mesh backing and its opening geometry.
Edge and seam
State framed, folded, rolled, welded or drawing-specific construction.
Flow and pressure
Show normal/reverse flow and differential-pressure load on the media.
For a supported cylindrical body, compare the perforated filter tube. Material selection can begin with the 304 vs 316 wire mesh guide, but final compatibility remains service-specific.
Scope boundary: for an unformed screening panel or guard, start with welded wire mesh or expanded metal mesh. This page focuses on drawing-controlled fabricated filter and screen components with defined edges, supports and equipment interfaces.
Baskets, Flanges and Equipment Interfaces
A filter basket drawing should locate the body, flange or rim, handle, bottom, seam, support and removal clearance. The mating housing and sealing or seating face should be shown so the fabricated part can be inspected for fit.
See the existing custom stainless steel filter basket page for basket-specific purchasing information.
Real Maidong Fabricated Mesh Component Examples
These real Maidong product images demonstrate available forms and interfaces. They are not dimensional standards; final supply follows the approved drawing.
Mixed fabricated parts
Formed mesh caps
Filter disc edges
Basket interfaces
How to Prepare a Comparable Custom-Part RFQ
1. Define the duty
Medium, contaminant, retention target, flow, pressure and temperature.
2. Define the media
Material, weave, wire/aperture or rating basis and layer order.
3. Attach the drawing
Finished shape, interfaces, critical dimensions, tolerances and revision.
4. Define fabrication
Support, edges, rims, seams, welds, caps and surface requirements.
5. Define acceptance
Inspection, documents, quantity, units and delivery country.
Custom Wire Mesh Part RFQ Checklist
Send the controlled drawing together with the service data. If a specification value is unknown, describe the function and mating equipment rather than guessing a mesh number or tolerance.
Custom Wire Mesh Fabrication FAQ
Send the drawing revision, material, mesh or aperture, wire diameter or rating basis, finished dimensions, tolerances, layers, support, edge, joint, surface requirements, quantity and operating conditions.
Enquiries can include cut screens, framed discs, formed caps, cylindrical screens, filter tubes, conical parts, baskets and multilayer assemblies. Feasibility depends on media geometry, forming, joining and required tolerances.
For square woven mesh, state mesh count with wire diameter or clear aperture. For Dutch weave, sintered or multilayer media, identify the full construction and agreed nominal, absolute or test-based rating.
Yes, a fine retention layer may be combined with perforated, expanded or coarse-mesh support. Show the layer order, attachment, normal and reverse flow, and differential-pressure loading.
No. Identify dimensions that control fit, sealing, alignment or interchangeability, and apply practical tolerances to non-critical features. Unnecessary precision can limit fabrication options.
Include quantity, units, delivery country, drawing revision, inspection and document requirements alongside the technical construction. A reference image should not replace controlled dimensions.
Request a Drawing-Based Wire Mesh Quotation
Send the media specification, component drawing, interfaces, tolerances, operating conditions, inspection scope and quantity.
Specification Handoff and Enquiry Example
| Quotation review | Information to provide |
|---|---|
| Item identity | Part number, revision, quantity and supplied assembly scope |
| Manufacturing definition | Media, formed geometry, edge/seam and joining requirement |
| Acceptance | Critical features, inspection basis and required records |
Example RFQ Line to Complete
Replace the bracketed fields with your order requirements:
OEM mesh part; item [part/revision]; quantity [initial and repeat quantities]; media [specification]; finished geometry [drawing]; joining/edge [requirement]; mating component [reference]; critical inspection features [list]; application [duty].
Related selection resources: Stainless Steel Wire Mesh; Custom Wire Mesh Filter Caps; Mesh Cylinders; Filter Element Drawing and Tolerance Checklist.
Send the current drawing or complete specification, quantity, application and delivery destination through our contact page. Identify any required inspection or material records before quotation; availability and acceptance requirements are confirmed for the actual order.