Stainless Steel Mesh Filter Cartridges for Blanking Wash Oils
Supported mesh cartridges for sheet-metal blanking wash-oil circuits. Specify process position, fines, oil viscosity, support and housing interfaces.
Complete Mesh Cartridge in the Blanking Wash Circuit
Supply covers the complete woven metal cartridge in a purchaser-defined wash-oil filter housing associated with sheet-metal blanking. It is separate from the press, wash nozzles, magnetic separator and any filter-paper system. Locate the intended metal cartridge before comparing specifications.
Explore the main custom mesh cylinders showcase for related metal mesh constructions.
Metal-only supply covers the component body and metal fittings expressly agreed in the quotation. Seals, gaskets and complete equipment are separate.
Wash Oil Metal Fines and Circulation
State wash-oil composition, metal fines or other debris, temperature-dependent viscosity and required circulation flow. Define wanted additives and permissible particle passage separately. This filter does not remove dissolved additives or establish finished-sheet surface quality or press performance.
Specify the Complete Component
Provide cylinder dimensions, mesh, seam, backing and metal ends. Show seating, flow direction, bypass boundary and removal space. Define support for startup and any approved reverse cleaning. A filter housing connection does not define cartridge fit.
Include the component revision, mating-interface drawing and the required exposed flow area. Agree the joints, support relationship and any purchaser-provided fitting sample before fabrication.
Information for a Comparable Quotation
| Requirement | Details to provide |
|---|---|
| Screen | Woven cloth, backing, seam and ends |
| Circuit | Wash position, housing and protected equipment |
| Oil | Chemistry, fines, viscosity and flow |
| Acceptance | Passage, restriction and cleaning exposure |
Housing Fit and Oil-Passage Trials
Agree housing fit, particle passage and restriction trials under actual oil conditions. Inspect mesh, supports and seams after the approved cleaning exposure. Related screen cylinders do not show demonstrated blanking-line service or universal compatibility.
Use the intended mating assembly and purchaser-approved test plan. Agree dimensional inspection and operating acceptance separately; a related construction photograph cannot replace these checks.
Cleaning, Inspection and Repeat Supply
Specify the cleaning method, chemicals, temperature and permitted mechanical handling. Inspect the mesh, edges, joints and supports after cleaning and agree when the component should be rejected or replaced.
For repeat orders, use the accepted component drawing and material specification with the same inspection requirements. Identify changes in fluid, particles, loading or installation before reusing a previous specification.
Product Enquiry FAQ
Send the component and holder drawings, metal and mesh requirements, operating conditions, quantity and acceptance criteria. Unspecified dimensions or duties can be marked for review.
No. It screens the specified particles. A magnetic stage, if used, is a separate component with its own interface and supply scope.
No. This enquiry covers the agreed metal component. Sealing parts, housings and complete equipment are separate.
They show related component or material construction from the existing library. The supplied item follows the agreed drawing and sample acceptance; the images are not an installed-service case study.
Send Your Component and Mating Drawings
Describe the installation, material, mesh requirement and quantity. Maidong can review the requested metal component for fabrication and quotation.