Stainless Steel Mesh Face Screens for Rendered Animal Fat Pressure Leaf Filters
Woven face-screen pieces for approved rendered-fat pressure leaves. Specify warm-stream solids, viscosity, leaf geometry, drainage and cleaning.
Face Screen Set in the Rendered-Fat Pressure Leaf
The part is the working woven screen set in a pressure leaf for a specified rendered animal-fat filtration stage. It differs from an earlier bulk-oversize cylinder in a wet byproduct stream. Leaf frame, manifold, heating and complete rendering equipment are separate.
Explore the main metal disc filter elements showcase for related metal mesh constructions.
Metal-only supply covers the component body and metal fittings expressly agreed in the quotation. Seals, gaskets and complete equipment are separate.
Warm Fat Stream and Suspended Residues
State actual fat stream, useful product fraction, suspended residue, temperature and viscosity. Include additives, filter aid if used, pressure-loss endpoint and shutdown/cleaning conditions. The component does not establish rendering efficiency, product-use approval or final fat grade.
Specify the Complete Component
Provide leaf outlines, retained margins, outlet clearance and mesh-layer section. Identify working faces, backing and drainage pieces. Define included metal edge work, orientation and quantities per set. Related flat screens do not establish a complete rendering filter leaf.
Include the component revision, mating-interface drawing and the required exposed flow area. Agree the joints, support relationship and any purchaser-provided fitting sample before fabrication.
Information for a Comparable Quotation
| Requirement | Details to provide |
|---|---|
| Leaf set | Working faces, supports and drainage order |
| Fit | Profiles, margins, outlet and orientation |
| Fat | Stream, residue, temperature and viscosity |
| Trial | Passage, drainage and cleaning acceptance |
Leaf Fit and Cleaning Acceptance
Trial solids passage, fitted drainage and residue release at representative conditions. Agree metal identity, geometry and required cleaning/contact records for the actual destination use. Thermal management and complete-process quality checks remain separate.
Use the intended mating assembly and purchaser-approved test plan. Agree dimensional inspection and operating acceptance separately; a related construction photograph cannot replace these checks.
Cleaning, Inspection and Repeat Supply
Specify the cleaning method, chemicals, temperature and permitted mechanical handling. Inspect the mesh, edges, joints and supports after cleaning and agree when the component should be rejected or replaced.
For repeat orders, use the accepted component drawing and material specification with the same inspection requirements. Identify changes in fluid, particles, loading or installation before reusing a previous specification.
Product Enquiry FAQ
Send the component and holder drawings, metal and mesh requirements, operating conditions, quantity and acceptance criteria. Unspecified dimensions or duties can be marked for review.
No. It covers flat face and backing screen pieces in an approved rendered-fat pressure leaf, with its own cake and drainage arrangement.
No. This enquiry covers the agreed metal component. Sealing parts, housings and complete equipment are separate.
They show related component or material construction from the existing library. The supplied item follows the agreed drawing and sample acceptance; the images are not an installed-service case study.
Send Your Component and Mating Drawings
Describe the installation, material, mesh requirement and quantity. Maidong can review the requested metal component for fabrication and quotation.