Stainless Steel Mesh Face Screens for Paraffin Wax Pressure Leaf Filters
Woven screen pieces for approved liquid-paraffin pressure leaves. Specify wax condition, solids, layer order, retained edges and controlled shutdown.
Woven Faces in the Liquid-Paraffin Filter Leaf
Supply covers working woven faces and expressly agreed support screens in a paraffin-wax pressure leaf. It is separate from a cylindrical wax cartridge and from cooling-based edible-oil winterization. Complete frames, outlets and heated vessels are separate supply scopes.
Explore the main metal disc filter elements showcase for related metal mesh constructions.
Metal-only supply covers the component body and metal fittings expressly agreed in the quotation. Seals, gaskets and complete equipment are separate.
Wax Temperature Solids and Shutdown
State wax composition, additives, suspended particles, filtration temperature and viscosity. Include temperature changes, potential solidification and the approved flushing/cleaning sequence. Mesh does not separate dissolved constituents or guarantee finished wax colour or grade.
Specify the Complete Component
Provide the leaf profile, captured edges, outlet clearance and layer section. Specify weave, wires, support/drainage order and intended flow face. Identify any joining and the piece count per leaf. Photos show related screens rather than an installed heated wax assembly.
Include the component revision, mating-interface drawing and the required exposed flow area. Agree the joints, support relationship and any purchaser-provided fitting sample before fabrication.
Information for a Comparable Quotation
| Requirement | Details to provide |
|---|---|
| Screens | Working weave and separate support layers |
| Leaf | Profile, captured edges and outlet |
| Wax duty | Composition, particles, viscosity and shutdown |
| Acceptance | Passage, drainage and residue removal |
Drainage and Residue-Removal Trials
Agree fitted drainage, particle passage and residue-removal trials under the equipment owner's procedure. Inspect mesh and retained edges after thermal/cleaning exposure. Heating capacity and system shutdown control cannot be inferred from a screen specification.
Use the intended mating assembly and purchaser-approved test plan. Agree dimensional inspection and operating acceptance separately; a related construction photograph cannot replace these checks.
Cleaning, Inspection and Repeat Supply
Specify the cleaning method, chemicals, temperature and permitted mechanical handling. Inspect the mesh, edges, joints and supports after cleaning and agree when the component should be rejected or replaced.
For repeat orders, use the accepted component drawing and material specification with the same inspection requirements. Identify changes in fluid, particles, loading or installation before reusing a previous specification.
Product Enquiry FAQ
Send the component and holder drawings, metal and mesh requirements, operating conditions, quantity and acceptance criteria. Unspecified dimensions or duties can be marked for review.
No. It is a metal screen-component enquiry. The leaf assembly and thermal equipment need separate drawings and supply scope.
No. This enquiry covers the agreed metal component. Sealing parts, housings and complete equipment are separate.
They show related component or material construction from the existing library. The supplied item follows the agreed drawing and sample acceptance; the images are not an installed-service case study.
Send Your Component and Mating Drawings
Describe the installation, material, mesh requirement and quantity. Maidong can review the requested metal component for fabrication and quotation.