Stainless Steel Mesh Face Screens for Edible Oil Winterization Filters
Woven screen sets for approved edible-oil winterization pressure leaves. Define wax-crystal duty, mesh layers, leaf interfaces and cake-release acceptance.
Working Mesh Faces in the Winterization Leaf
The part is the woven working-face screen or separately specified screen set inside a winterization pressure leaf. It is separate from a liquid-oil cartridge, chiller and the complete leaf assembly. Identify loose face, support and drainage pieces rather than calling the leaf one mesh grade.
Explore the main metal disc filter elements showcase for related metal mesh constructions.
Metal-only supply covers the component body and metal fittings expressly agreed in the quotation. Seals, gaskets and complete equipment are separate.
Solid Wax Crystals and Filtration Temperature
State oil composition, temperature at filtration, crystal distribution, filter-aid use and viscosity. Define flow, restriction and cake/discharge sequence. Mesh screens retain the agreed solid fraction; they do not establish removal of dissolved wax, cloud point or final oil quality.
Specify the Complete Component
Provide leaf outline, retained edge, outlet clearance and layer section. Specify weave, wires, rating basis and captured margin. Show supported area and drainage path. Related flat screens are fabrication references, not complete framed winterization leaves.
Include the component revision, mating-interface drawing and the required exposed flow area. Agree the joints, support relationship and any purchaser-provided fitting sample before fabrication.
Information for a Comparable Quotation
| Requirement | Details to provide |
|---|---|
| Leaf set | Face weave, backing and drainage order |
| Geometry | Profile, edge capture and outlet clearance |
| Oil | Temperature, crystals, viscosity and filter aid |
| Trial | Passage, cake release and cleaning |
Drainage and Cake-Release Acceptance
Trial crystal passage, drainage and cake release in the approved leaf arrangement. Agree cleaning exposure, residue acceptance and requested contact documentation. Process cooling and crystallization conditions remain separate from screen supply.
Use the intended mating assembly and purchaser-approved test plan. Agree dimensional inspection and operating acceptance separately; a related construction photograph cannot replace these checks.
Cleaning, Inspection and Repeat Supply
Specify the cleaning method, chemicals, temperature and permitted mechanical handling. Inspect the mesh, edges, joints and supports after cleaning and agree when the component should be rejected or replaced.
For repeat orders, use the accepted component drawing and material specification with the same inspection requirements. Identify changes in fluid, particles, loading or installation before reusing a previous specification.
Product Enquiry FAQ
Send the component and holder drawings, metal and mesh requirements, operating conditions, quantity and acceptance criteria. Unspecified dimensions or duties can be marked for review.
No. Crystallization and the complete filtration process determine the result. Define solid-crystal passage and validate the finished oil independently.
No. This enquiry covers the agreed metal component. Sealing parts, housings and complete equipment are separate.
They show related component or material construction from the existing library. The supplied item follows the agreed drawing and sample acceptance; the images are not an installed-service case study.
Send Your Component and Mating Drawings
Describe the installation, material, mesh requirement and quantity. Maidong can review the requested metal component for fabrication and quotation.