Stainless Steel Mesh Face Screens for Cheese Brine Pressure Leaf Filters
Woven screen pieces for approved cheese-brine pressure leaves. Specify salt chemistry, suspended solids, layer order, leaf geometry and cleaning.
Working Face and Backing Screens in the Brine Leaf
Supply covers the working woven face screens and expressly agreed support pieces in a cheese-brine pressure leaf. It is separate from a drainage tray, ordinary inline brine strainer and microbiological treatment system. Leaf frame and outlet assembly are separate unless drawn and agreed.
Explore the main metal disc filter elements showcase for related metal mesh constructions.
Metal-only supply covers the component body and metal fittings expressly agreed in the quotation. Seals, gaskets and complete equipment are separate.
Salt Chemistry and Cheese Residues
State salt concentration, pH, temperature, suspended cheese residues and any filter aid. Provide flow, restriction and cleaning/discharge conditions. Stainless compatibility requires review of actual brine exposure. The screen does not correct salt concentration or guarantee microbial safety.
Specify the Complete Component
Send leaf profiles, captured margins, outlet clearances and mesh-layer section. Specify working weave, directional wires and drainage mesh order. Define included edge work and the quantity per leaf/set. Related screens show material and outline options, not a completed brine filter leaf.
Include the component revision, mating-interface drawing and the required exposed flow area. Agree the joints, support relationship and any purchaser-provided fitting sample before fabrication.
Information for a Comparable Quotation
| Requirement | Details to provide |
|---|---|
| Media | Working faces, wires and drainage supports |
| Leaf | Outline, retained edge and outlet |
| Brine | Salt, pH, temperature and cheese residues |
| Acceptance | Fit, passage, cleaning and corrosion review |
Corrosion Review and Cleaning Trials
Check fit, edges, drainage and solids passage using representative brine. Agree residue removal and material/contact records explicitly. Corrosion and cleaning acceptance follow the process specification rather than a generic food-grade label.
Use the intended mating assembly and purchaser-approved test plan. Agree dimensional inspection and operating acceptance separately; a related construction photograph cannot replace these checks.
Cleaning, Inspection and Repeat Supply
Specify the cleaning method, chemicals, temperature and permitted mechanical handling. Inspect the mesh, edges, joints and supports after cleaning and agree when the component should be rejected or replaced.
For repeat orders, use the accepted component drawing and material specification with the same inspection requirements. Identify changes in fluid, particles, loading or installation before reusing a previous specification.
Product Enquiry FAQ
Send the component and holder drawings, metal and mesh requirements, operating conditions, quantity and acceptance criteria. Unspecified dimensions or duties can be marked for review.
No. Its role is the agreed suspended-solids filtration. Dissolved composition and microbiological control require separate process steps.
No. This enquiry covers the agreed metal component. Sealing parts, housings and complete equipment are separate.
They show related component or material construction from the existing library. The supplied item follows the agreed drawing and sample acceptance; the images are not an installed-service case study.
Send Your Component and Mating Drawings
Describe the installation, material, mesh requirement and quantity. Maidong can review the requested metal component for fabrication and quotation.