Sintered Stainless Steel Powder Filter Cartridges for Wine and Beer
Powder-sintered porous cartridges for approved wine and beer liquid housings. Define porous body, particle acceptance, metal interfaces and residue trials.
Powder-Sintered Porous Body in the Beverage Housing
The ordered product is a powder-sintered stainless porous cartridge with the agreed metal interfaces at a specified beverage particle-filtration stage. Powder media, bonded woven mesh and sintered metal fibre are different constructions. The quotation must identify the actual porous body rather than using the general word sintered.
Explore the main powder-sintered metal filters showcase for related metal mesh constructions.
Metal-only supply covers the component body and metal fittings expressly agreed in the quotation. Seals, gaskets and complete equipment are separate.
Wine Beer and Defined Particle Duty
State wine or beer formulation, process stage, suspended solids and constituents intended to pass. Provide temperature, flow, viscosity and clean/loaded restriction with cleaning exposure. Porous construction alone does not establish sterile filtration, clarity, flavour preservation or reuse life.
Specify the Complete Component
Provide body diameters, active length, porous wall, closed end and housing seat or fitting. Define porous-grade or retention acceptance and flow direction. Show supporting surfaces, bypass boundary and service access. Seals, housing and complete beverage line are separate.
Include the component revision, mating-interface drawing and the required exposed flow area. Agree the joints, support relationship and any purchaser-provided fitting sample before fabrication.
Information for a Comparable Quotation
| Requirement | Details to provide |
|---|---|
| Medium | Powder porous specification and retention basis |
| Body | Wall, dimensions, ends and housing fit |
| Liquid | Stage, particles, desired constituents and flow |
| Acceptance | Passage, residue removal and contact records |
Medium Identification and Residue Acceptance
Agree passage and flow tests using the intended liquid and holder. Evaluate residue removal and requested contact records, plus body and fitting inspection after cleaning. Existing porous cylinders show related construction; no manufacturer's beverage performance or certification is transferred.
Use the intended mating assembly and purchaser-approved test plan. Agree dimensional inspection and operating acceptance separately; a related construction photograph cannot replace these checks.
Cleaning, Inspection and Repeat Supply
Specify the cleaning method, chemicals, temperature and permitted mechanical handling. Inspect the mesh, edges, joints and supports after cleaning and agree when the component should be rejected or replaced.
For repeat orders, use the accepted component drawing and material specification with the same inspection requirements. Identify changes in fluid, particles, loading or installation before reusing a previous specification.
Product Enquiry FAQ
Send the component and holder drawings, metal and mesh requirements, operating conditions, quantity and acceptance criteria. Unspecified dimensions or duties can be marked for review.
No. Specify the approved medium and test basis. Similar cartridge dimensions or nominal pore labels do not establish equivalent filtration.
No. This enquiry covers the agreed metal component. Sealing parts, housings and complete equipment are separate.
They show related component or material construction from the existing library. The supplied item follows the agreed drawing and sample acceptance; the images are not an installed-service case study.
Send Your Component and Mating Drawings
Describe the installation, material, mesh requirement and quantity. Maidong can review the requested metal component for fabrication and quotation.