Stainless Steel Mesh Filter Cartridges for Automotive Solvent Wash Circuits
Supported woven cartridges for approved automotive solvent-wash housings. Specify wash chemistry, collected debris, mesh body and clean/loaded restriction.
Complete Woven Cartridge in the Automotive Wash Circuit
The item is a complete woven metal cartridge in the purchaser-defined filter housing of an automotive solvent-wash circuit. It is separate from a loose Dutch-weave sleeve, solvent recovery still and complete washing machine. State the actual wash position and required metal component.
Explore the main custom mesh cylinders showcase for related metal mesh constructions.
Metal-only supply covers the component body and metal fittings expressly agreed in the quotation. Seals, gaskets and complete equipment are separate.
Solvent Chemistry and Collected Debris
List solvents, water content, additives and cleaning exposure. Define oils, chips, coating residue or other unwanted suspended solids, flow and temperature. Mesh screening does not purify dissolved solvents, restore chemical composition or guarantee cleaned-part quality.
Specify the Complete Component
Provide cylinder envelope, mesh, seam, backing and metal ends. Show holder seating, bypass boundary, flow direction and removal access. Identify the working weave independently of coarse protection. Confirm all interfaces against the housing drawing rather than a nominal line connection.
Include the component revision, mating-interface drawing and the required exposed flow area. Agree the joints, support relationship and any purchaser-provided fitting sample before fabrication.
Information for a Comparable Quotation
| Requirement | Details to provide |
|---|---|
| Cartridge | Working mesh, backing, seam and metal ends |
| Wash | Full solvent chemistry and suspended residues |
| Housing | Seat, bypass, direction and removal |
| Trial | Passage, restriction and compatibility |
Housing Fit and Wash-Fluid Trials
Trial fit, particle passage and restriction with the representative wash fluid. Agree compatibility and removal of retained deposits after the approved cleaning. Washing performance, solvent handling and machine approval remain complete-system matters.
Use the intended mating assembly and purchaser-approved test plan. Agree dimensional inspection and operating acceptance separately; a related construction photograph cannot replace these checks.
Related Metal Cylinder Reference
Existing mesh-cylinder product clip illustrates related body and end construction only. It does not show an automotive solvent-wash installation, approved compatibility or validated washing performance.
Cleaning, Inspection and Repeat Supply
Specify the cleaning method, chemicals, temperature and permitted mechanical handling. Inspect the mesh, edges, joints and supports after cleaning and agree when the component should be rejected or replaced.
For repeat orders, use the accepted component drawing and material specification with the same inspection requirements. Identify changes in fluid, particles, loading or installation before reusing a previous specification.
Product Enquiry FAQ
Send the component and holder drawings, metal and mesh requirements, operating conditions, quantity and acceptance criteria. Unspecified dimensions or duties can be marked for review.
No. It screens the agreed suspended debris. Recovery of dissolved solvent or chemical constituents is a separate operation.
No. This enquiry covers the agreed metal component. Sealing parts, housings and complete equipment are separate.
They show related component or material construction from the existing library. The supplied item follows the agreed drawing and sample acceptance; the images are not an installed-service case study.
Send Your Component and Mating Drawings
Describe the installation, material, mesh requirement and quantity. Maidong can review the requested metal component for fabrication and quotation.