Stainless Steel Mesh Face Screens for Activated Carbon Pressure Leaf Filters
Woven working-face screens for spent-carbon pressure leaves. Specify carbon fines, leaf profile, drainage layers, filtrate-solids limit and cake release.
Woven Working Faces for Spent Carbon Cake
The product is the woven face screen or specified cut screen set in a pressure leaf retaining spent activated-carbon particles from a defined liquid. The carbon has its own adsorption role; the metal screen provides the agreed mechanical solids separation. Frames, outlets and complete vessels are separate.
Explore the main metal disc filter elements showcase for related metal mesh constructions.
Metal-only supply covers the component body and metal fittings expressly agreed in the quotation. Seals, gaskets and complete equipment are separate.
Carbon Fines and Liquid Passage
Identify carbon grade and fines, liquid chemistry, viscosity, temperature and acceptable residual solids. Define filter-aid use, cake loading, flow and pressure-loss endpoint. The mesh does not itself adsorb dissolved contaminants or establish a decolorization result.
Specify the Complete Component
Provide leaf outline, edge allowance, outlet clearance and working/support/drainage layer section. Specify directional wire data, fine-face orientation and attachment. State which pieces are loose and which metal edges are included; photographs show related flat screens rather than complete leaves.
Include the component revision, mating-interface drawing and the required exposed flow area. Agree the joints, support relationship and any purchaser-provided fitting sample before fabrication.
Information for a Comparable Quotation
| Requirement | Details to provide |
|---|---|
| Screen set | Face weave, separate backing and drainage |
| Leaf fit | Outline, captured edge and outlet clearance |
| Carbon duty | Fines, loading, liquid and residual-solids limit |
| Trial | Passage, cake release and cleaning |
Leaf Drainage and Carbon-Passage Trials
Trial carbon passage, fitted drainage and cake release under the approved cycle. Agree residue removal, screen-edge inspection and requested records. Match the acceptance to the actual carbon/liquid stream rather than assuming a mesh count guarantees fine-carbon retention.
Use the intended mating assembly and purchaser-approved test plan. Agree dimensional inspection and operating acceptance separately; a related construction photograph cannot replace these checks.
Cleaning, Inspection and Repeat Supply
Specify the cleaning method, chemicals, temperature and permitted mechanical handling. Inspect the mesh, edges, joints and supports after cleaning and agree when the component should be rejected or replaced.
For repeat orders, use the accepted component drawing and material specification with the same inspection requirements. Identify changes in fluid, particles, loading or installation before reusing a previous specification.
Product Enquiry FAQ
Send the component and holder drawings, metal and mesh requirements, operating conditions, quantity and acceptance criteria. Unspecified dimensions or duties can be marked for review.
No. Supply covers the agreed metal screen pieces. Adsorbent selection, dosing and dissolved-contaminant removal are separate process requirements.
No. This enquiry covers the agreed metal component. Sealing parts, housings and complete equipment are separate.
They show related component or material construction from the existing library. The supplied item follows the agreed drawing and sample acceptance; the images are not an installed-service case study.
Send Your Component and Mating Drawings
Describe the installation, material, mesh requirement and quantity. Maidong can review the requested metal component for fabrication and quotation.