Stainless Steel Mesh Face Screens for Sodium Silicate Pressure Leaf Filters
Woven face-screen pieces for approved water-glass pressure leaves. Specify silicate solution, deposits, mesh layers, drainage and cleaning acceptance.
Working Screens in the Water-Glass Filter Leaf
Supply is the working woven face screen and agreed backing pieces in a sodium-silicate or water-glass pressure leaf. It is separate from a plate-and-frame cloth pack and the complete leaf assembly. Confirm the chosen equipment type and screen-layer drawing before ordering.
Explore the main metal disc filter elements showcase for related metal mesh constructions.
Metal-only supply covers the component body and metal fittings expressly agreed in the quotation. Seals, gaskets and complete equipment are separate.
Solution Viscosity Deposits and Shutdown
State solution composition, concentration, temperature, viscosity, insoluble solids and filter aid. Include deposits or hardening during shutdown and the approved flush/cleaning sequence. A screen does not establish dissolved-silicate composition or final product specification.
Specify the Complete Component
Provide leaf outline, captured edge, outlet clearance and layer order. Define the working mesh, support and drainage separately, including fine-face direction and attachment. Identify wet handling or storage requirements relevant to the approved screen assembly.
Include the component revision, mating-interface drawing and the required exposed flow area. Agree the joints, support relationship and any purchaser-provided fitting sample before fabrication.
Information for a Comparable Quotation
| Requirement | Details to provide |
|---|---|
| Media | Face weave, separate supports and drainage |
| Leaf | Outline, retained edge and outlet |
| Solution | Concentration, viscosity, insolubles and filter aid |
| Acceptance | Passage, flushing, deposits and fitted drainage |
Leaf Fit and Controlled Flushing
Agree fit, drainage and particle-passage trials with representative solution. Inspect residues and screen condition after approved cleaning. The process owner determines precautions against hard deposits; no universal cleaning method or equipment capacity is offered.
Use the intended mating assembly and purchaser-approved test plan. Agree dimensional inspection and operating acceptance separately; a related construction photograph cannot replace these checks.
Cleaning, Inspection and Repeat Supply
Specify the cleaning method, chemicals, temperature and permitted mechanical handling. Inspect the mesh, edges, joints and supports after cleaning and agree when the component should be rejected or replaced.
For repeat orders, use the accepted component drawing and material specification with the same inspection requirements. Identify changes in fluid, particles, loading or installation before reusing a previous specification.
Product Enquiry FAQ
Send the component and holder drawings, metal and mesh requirements, operating conditions, quantity and acceptance criteria. Unspecified dimensions or duties can be marked for review.
No automatic fit is assumed. Provide the actual leaf profile, backing and drainage section rather than substituting another filter layout.
No. This enquiry covers the agreed metal component. Sealing parts, housings and complete equipment are separate.
They show related component or material construction from the existing library. The supplied item follows the agreed drawing and sample acceptance; the images are not an installed-service case study.
Send Your Component and Mating Drawings
Describe the installation, material, mesh requirement and quantity. Maidong can review the requested metal component for fabrication and quotation.