Sintered Stainless Steel Air Sparger Elements for Volatile Stripping
Porous metal air-injection elements for approved volatile-stripping vessels. Specify liquid chemistry, gas flow, immersion and controlled off-gas interfaces.
Porous Air-Injection Body Inside the Stripping Vessel
The part is a powder-sintered porous metal body introducing air into the specified volatile-stripping vessel. It is separate from a mechanical liquid filter, packed stripping column and off-gas treatment system. Supply covers the body and expressly agreed metal fitting.
Explore the main powder-sintered metal filters showcase for related metal mesh constructions.
Metal-only supply covers the component body and metal fittings expressly agreed in the quotation. Seals, gaskets and complete equipment are separate.
Volatiles Liquid Exposure and Off-Gas Boundary
Identify liquid constituents, target volatiles, solids, temperature and liquid head. Specify air flow and reference conditions, allowable element loss and cleaning duty. Transfer and capture of contaminants require the complete process and off-gas arrangement; a porous element does not guarantee outlet concentration or discharge compliance.
Specify the Complete Component
Send body diameters, active length, wall, closure and inlet drawing. Show immersed orientation, support and service access. Define porous-grade or gas-flow acceptance. Short hose-connected and threaded bodies are related configuration references; the ordered vessel connection follows its own drawing.
Include the component revision, mating-interface drawing and the required exposed flow area. Agree the joints, support relationship and any purchaser-provided fitting sample before fabrication.
Information for a Comparable Quotation
| Requirement | Details to provide |
|---|---|
| Body | Porous geometry, fitting and support |
| Liquid | Volatiles, chemistry, solids and temperature |
| Air | Reference flow, head and pressure loss |
| Acceptance | Gas passage, cleaning and complete stripping trial |
Fitting and Full-System Stripping Trial
Agree gas passage, fitted connection and compatibility checks. Trial stripping and off-gas handling under the purchaser-approved system procedure. Define cleaning/restart acceptance independently of contaminant-removal targets. No field treatment result is claimed for the reference bodies.
Use the intended mating assembly and purchaser-approved test plan. Agree dimensional inspection and operating acceptance separately; a related construction photograph cannot replace these checks.
Cleaning, Inspection and Repeat Supply
Specify the cleaning method, chemicals, temperature and permitted mechanical handling. Inspect the mesh, edges, joints and supports after cleaning and agree when the component should be rejected or replaced.
For repeat orders, use the accepted component drawing and material specification with the same inspection requirements. Identify changes in fluid, particles, loading or installation before reusing a previous specification.
Product Enquiry FAQ
Send the component and holder drawings, metal and mesh requirements, operating conditions, quantity and acceptance criteria. Unspecified dimensions or duties can be marked for review.
No. It introduces the specified gas. The vessel and off-gas handling system must provide the approved collection and treatment route.
No. This enquiry covers the agreed metal component. Sealing parts, housings and complete equipment are separate.
They show related component or material construction from the existing library. The supplied item follows the agreed drawing and sample acceptance; the images are not an installed-service case study.
Send Your Component and Mating Drawings
Describe the installation, material, mesh requirement and quantity. Maidong can review the requested metal component for fabrication and quotation.