Stainless Steel Mesh Face Screens for Pectin Pressure Leaf Filters
Woven screen sets for approved pectin pressure leaves. Specify working faces, drainage backing, leaf profile and representative liquid/cake behaviour.
Working Face Screens in the Pectin Pressure Leaf
Supply is the specified woven face screen or cut screen set in a pectin pressure leaf. It differs from the cylindrical separator removing fibrous extraction residue. The complete leaf frame, outlet manifold and vessel are separate unless expressly drawn and agreed.
Explore the main metal disc filter elements showcase for related metal mesh constructions.
Metal-only supply covers the component body and metal fittings expressly agreed in the quotation. Seals, gaskets and complete equipment are separate.
Pectin-Bearing Liquid and Cake Behaviour
State pectin-bearing stream and process location, composition, viscosity at temperature, solids and filter-aid use. Define wanted liquid passage and cake discharge/washing. Mesh selection cannot establish pectin yield, molecular characteristics or final grade; those require separate process tests.
Specify the Complete Component
Provide the leaf outline, edge allowance, outlet clearance and layer order. Identify working faces, supporting meshes and drainage route independently. Show retained areas, fine-face orientation and attachment. Related screens illustrate possible flat forms, not complete pectin filter leaves.
Include the component revision, mating-interface drawing and the required exposed flow area. Agree the joints, support relationship and any purchaser-provided fitting sample before fabrication.
Information for a Comparable Quotation
| Requirement | Details to provide |
|---|---|
| Leaf | Outline, edge allowance and outlet clearance |
| Layers | Working faces, support and drainage |
| Pectin stream | Stage, viscosity, solids and cake cycle |
| Trial | Passage, release, cleaning and records |
Retained Edges and Drainage Trials
Agree fitted geometry, drainage, passage and cake-release trials under representative conditions. Define residue removal, cleaning exposure and any required contact records. No food-process certification or supplier-equipment capacity is inferred from the photographed cloth.
Use the intended mating assembly and purchaser-approved test plan. Agree dimensional inspection and operating acceptance separately; a related construction photograph cannot replace these checks.
Cleaning, Inspection and Repeat Supply
Specify the cleaning method, chemicals, temperature and permitted mechanical handling. Inspect the mesh, edges, joints and supports after cleaning and agree when the component should be rejected or replaced.
For repeat orders, use the accepted component drawing and material specification with the same inspection requirements. Identify changes in fluid, particles, loading or installation before reusing a previous specification.
Product Enquiry FAQ
Send the component and holder drawings, metal and mesh requirements, operating conditions, quantity and acceptance criteria. Unspecified dimensions or duties can be marked for review.
No. It is a flat working-face screen set retained in a pressure leaf. Provide the leaf section and layer drawings.
No. This enquiry covers the agreed metal component. Sealing parts, housings and complete equipment are separate.
They show related component or material construction from the existing library. The supplied item follows the agreed drawing and sample acceptance; the images are not an installed-service case study.
Send Your Component and Mating Drawings
Describe the installation, material, mesh requirement and quantity. Maidong can review the requested metal component for fabrication and quotation.