Sintered Wire Mesh Filter Cartridges for Gasification Syngas
Bonded metal mesh cartridges for approved syngas particle-filter housings. Define actual gas exposure, char loading, laminate, interfaces and cleaning loads.
Bonded Mesh Cartridge at the Specified Gas Stage
The ordered item is a bonded woven-metal cartridge at a purchaser-defined particle-filter stage in a gasification syngas train. It covers the agreed body and metal interfaces, separate from the gasifier, cooler and pulse-control system. Construction photographs show related mesh components, not proof that standard stainless suits every hot-gas duty.
Explore the main sintered filter cartridges showcase for related metal mesh constructions.
Metal-only supply covers the component body and metal fittings expressly agreed in the quotation. Seals, gaskets and complete equipment are separate.
Syngas Chemistry Char and Actual Temperature
State complete gas composition, temperature at this filter stage, pressure, flow reference, char distribution and any tar or condensate. Material selection requires specific exposure review; a generic stainless grade cannot establish suitability for the hottest gasifier stage. Mesh particle screening does not remove dissolved gases or guarantee downstream gas purity.
Specify the Complete Component
Provide cylinder envelope, porous thickness, fine-face direction, ends and supporting structure. Show tube-sheet or holder attachment and removal clearance. Define bonded layers, seam and joints together. If pulse cleaning is used, include direction, duration and load path in the installed drawing.
Include the component revision, mating-interface drawing and the required exposed flow area. Agree the joints, support relationship and any purchaser-provided fitting sample before fabrication.
Information for a Comparable Quotation
| Requirement | Details to provide |
|---|---|
| Stage | Gas chemistry, actual temperature and particles |
| Medium | Approved alloy, bonded layers and test basis |
| Body | Envelope, ends, holder and load path |
| Acceptance | Gas passage, restriction and cleaning trial |
Installed Loads and Particle Acceptance
Agree gas-particle passage, pressure-loss and cleaning acceptance for the actual housing conditions. Review corrosion, deposition, thermal cycling and required records before sample approval. Source equipment limits and exotic-alloy options are not Maidong capabilities or ratings for the pictured stainless bodies.
Use the intended mating assembly and purchaser-approved test plan. Agree dimensional inspection and operating acceptance separately; a related construction photograph cannot replace these checks.
Cleaning, Inspection and Repeat Supply
Specify the cleaning method, chemicals, temperature and permitted mechanical handling. Inspect the mesh, edges, joints and supports after cleaning and agree when the component should be rejected or replaced.
For repeat orders, use the accepted component drawing and material specification with the same inspection requirements. Identify changes in fluid, particles, loading or installation before reusing a previous specification.
Product Enquiry FAQ
Send the component and holder drawings, metal and mesh requirements, operating conditions, quantity and acceptance criteria. Unspecified dimensions or duties can be marked for review.
No. Gas chemistry and temperature at the intended stage are essential. Compatibility, construction feasibility and acceptance must be reviewed before quotation confirmation.
No. This enquiry covers the agreed metal component. Sealing parts, housings and complete equipment are separate.
They show related component or material construction from the existing library. The supplied item follows the agreed drawing and sample acceptance; the images are not an installed-service case study.
Send Your Component and Mating Drawings
Describe the installation, material, mesh requirement and quantity. Maidong can review the requested metal component for fabrication and quotation.