Stainless Steel Mesh Filter Cartridges for Agrochemical Formulation Lines
Supported woven mesh cartridges for approved agrochemical liquid lines. Specify the actual formulation, unwanted debris, body interfaces and cleaning.
Supported Woven Cartridge in the Formulation Line
Supply covers a complete drawing-defined woven metal cylinder, backing and agreed metal ends in a formulation-line filter housing. It is separate from a field sprayer screen, a dry granule sieve and treatment intended to remove dissolved active chemicals. The filtration objective belongs to the actual production stream.
Explore the main custom mesh cylinders showcase for related metal mesh constructions.
Metal-only supply covers the component body and metal fittings expressly agreed in the quotation. Seals, gaskets and complete equipment are separate.
Active Ingredients and Suspended-Solids Objective
Identify every carrier, solvent, active ingredient, suspended solid and cleaning chemical relevant to compatibility. State whether desired dispersed particles must pass. Provide temperature, viscosity, flow and differential loads. Screening is not proof of active-ingredient concentration, formulation stability or environmental treatment performance.
Specify the Complete Component
Provide body diameters and length, seam, end seats and support drawing. Show installed flow direction, bypass boundary and service access. Define working weave, wire data and backing independently. Any pump, mixing equipment and automatic cleaning mechanism remain outside the agreed metal-component scope.
Include the component revision, mating-interface drawing and the required exposed flow area. Agree the joints, support relationship and any purchaser-provided fitting sample before fabrication.
Information for a Comparable Quotation
| Requirement | Details to provide |
|---|---|
| Formula | Complete chemistry and desired dispersed particles |
| Cylinder | Mesh, seam, ends and support |
| Housing | Seats, direction, bypass and removal |
| Trial | Passage, restriction and cleaning exposure |
Housing Fit and Compatibility Trials
Agree trial passage and pressure loss using representative formulation. Inspect edges, seam, support and metal ends against the drawing after approved cleaning. Material compatibility and any requested documentation require explicit review; no universal resistance or agrochemical approval is inferred from stainless appearance.
Use the intended mating assembly and purchaser-approved test plan. Agree dimensional inspection and operating acceptance separately; a related construction photograph cannot replace these checks.
Woven Cloth Stock Handling
Existing woven-cloth take-up clip illustrates related material handling only. It does not show agrochemical filtration, finished-cartridge assembly, verified alloy or factory ownership.
Cleaning, Inspection and Repeat Supply
Specify the cleaning method, chemicals, temperature and permitted mechanical handling. Inspect the mesh, edges, joints and supports after cleaning and agree when the component should be rejected or replaced.
For repeat orders, use the accepted component drawing and material specification with the same inspection requirements. Identify changes in fluid, particles, loading or installation before reusing a previous specification.
Product Enquiry FAQ
Send the component and holder drawings, metal and mesh requirements, operating conditions, quantity and acceptance criteria. Unspecified dimensions or duties can be marked for review.
No. This page covers a specified particle-screening component in a formulation line. Dissolved-chemical treatment is a different process.
No. This enquiry covers the agreed metal component. Sealing parts, housings and complete equipment are separate.
They show related component or material construction from the existing library. The supplied item follows the agreed drawing and sample acceptance; the images are not an installed-service case study.
Send Your Component and Mating Drawings
Describe the installation, material, mesh requirement and quantity. Maidong can review the requested metal component for fabrication and quotation.